Project Interloper

CIA STARGATE release

CIA-RDP96-00789R000600250005-4

Opens with: SUN STREAK Operational Report - 8822 (U)

Warning: text for all documents has not been verified. Errors are possible. Check the original by document ID on CREST.

3 pages, machine transcribed from the CIA’s released scan.

Approved For Release 2000/08/08 : CIA-RDP96-00789R000600250005-4
SUBJECT :
SUN STREAK Operational Report - 8822 (U)
1.
(S/NF/SK)
In October 1988, and again from 4-5 January 1989,
three remote viewers conducted a total of six sessions to collect
intelligence information concerning a facility of interest.
Site
was portrayed in an overhead photograph, and bordered in yellow
(TAB 1) .
2. (S/NF/SK)
Source Of1 described a large complex consisting of
numerous rectangular structures of various dimensions and
oriented in various directions with respect to one another.
These structures were interconnected both conceptually, and often
literally (see Sketch 1 at TAB B). It reminded the source of a
large industrial complex that was entirely self-sufficient and
contained, with its own power supply, its own processing and
refining facilities to execute all stages in production from raw
material to finished tangible end product (see Sketches 2 and 3
at TAB B). Source further described a large, round object "made
up of many angles," prismatic, reflective, that was hollow but
"with something inside" (see Sketch 4 at TAB B) .
When asked to explore the nature and/or purpose of this
complex, source reported the concepts of production, fabrication,
precision machining, and final assembly to produce an end
product. He further described the "end product" as round and
generally cylindrical in shape, though this was "somewhat
misleading," since "the outer surface is composed of many flat
angles, much like a mosaic." The object was "structurally
metallic, " with a "thin skin or outer shell of a composite or
other exotic material" (see Sketch 5 at TAB B). This object was
slowly turning or spinning in a clockwise direction.
The
"geometric panes" the source described as being on the exterior
of this object were reported to be smooth, glossy, reflective,
shiny, silvery, and hard. The surfaces were required to be flat
and geometric because the material was not malleable or
machinable -- "it must be mosaic-ed to conform to a specific
shape. " There was also a "flaming blast" coming from a nozzle-
like device associated with this object.
3.
(S/NF/SK) Source 018 originally reported "a group of
buildings built in an arc around a central point.
An individual
was accessed at this location, through whom source described a
possible grouping of long, low grey structures that had the sense
of being associated with "factory" or "plant. " Subsequent
sessions produced concepts of a "very tall, 'indented front'
building that was then located in relation to a road, hill, and --
a distance away to the northeast -- a power plant.
West of the
building was a "huge complex of buildings," which was then
furthered perceived. The complex reportedly involved a "rather
large and old-appearing structure" to the west, while "the other
buildings appeared much smaller, and arranged in a tight
pattern" -- which pattern was disrupted haphazardly by buildings
arranged in other patterns. Structures were significantly longer
Approved For Release 2000/08/08 : CIA-RDP96-00789R000600250005-4
Approved For Release 2000/08/08 : CIA-RDP96-00789R000600250005-4
than they were wide, and seemed about two stories tall. Inside
of one of the smaller structures was a "two-story high single
room," which had "work spaces among stacks of materiel, as though
things are brought in, then the workers move among the things to
do their work (as opposed to an assembly line, where the
materials are brought to the individual workplaces) ."
Source reported no incidence of "end-products" per se.
There did occur "machining and tooling of partially or previously
formed 'pieces', but do not handle the raw materials." Chemicals
are involved, in "dry, powdery form, which source "found to be
sticky solids, similar to solid rocket propellants," but these
were brought into the site in bulk form and used as part of the
production process. Source further reported an object formed
from pieces of a large, round, "pipe"-shaped object, one of
which, when completed, seemed intended for connection with some
other object (Sketch 6, TAB B). A loading dock was then
described, where objects of varying sizes were shipped on trucks.
Source reported the complex's most important product as a "small ,
shiny, metallic 'box-frame like' unit (Sketch 7, TAB B)" with
possible circuit boards inside it. One of these circuit boards
had a large, black, metallic, "thing" on one end (Sketch 8, TAB
B), the concave surface of which "radiates a constant signal
which is fed to it from the chips on the board." This signal is
"interrupted in regular time increments, giving the impression of
a digital signal."
Source also used the words "burst" and
"interrupts" in referring to this signal .
4. (S/NF/SK)
Source 079 described the site as a key industrial
complex, a research and development center dedicated to advanced
weaponry, SIGINT capabilities, and the assimilation of space
modular systems. Specific facility (referred to as "yellow
area" -- see TAB A) is an "industrial site" which specializes in
R&D for "conceptual mathematical designs, advanced weaponry with
space applications, development of advanced optics and laser
systems." Further information provided by the source involved
(phonetically reported) "Quasar/Qualar," reportedly some sort of
laser system; "Brunizem" activity (NF1); "brucine," Cpossibly a
poisonous alkaloid]; and "stoichiometry" [defined in dictionary
as dealing with laws of proportion and conservation of energy].
Someone named "Stillman" (NFI) was mentioned as knowledgeable of
this R&D effort.
"DF" antennas were reported to be related to
the "transmission and receipt of information from a Soviet space
satellite. "
A short distance away, in another potion of the facility
(referred to as "red area" -- see TAB A) which is not directly
connected with the compound in question ( "yellow area") , primary,
if not exclusive emphasis is aimed at R&D efforts in optics and
lasers. The focusing and direction of light beams was connected
with something called the "Alman Ring." Source provided a
conceptual representation of this "Alman RIng with light dots"
(Sketch 9, TAB B) .
The results of pure research conducted in
this portion of the facility are further explored in the
Approved For Release 2000/08/08 : CIA-RDP96-00789R000600250005-4
Approved For Release 2000/08/08 : CIA-RDP96-00789R000600250005-4
previously described "industrial" area to develop practical
applications. A US military/government official known as
"Putnam" has partial access to this facility, according to
source.
Approved For Release 2000/08/08 : CIA-RDP96-00789R000600250005-4

Follow along

New documents and dispatches as they publish. The newsletter is the one place to keep up.