Project Interloper

CIA STARGATE release

CIA-RDP96-00789R000100550011-9

Opens with: PROJECT SUN STREAK (U)

Warning: text for all documents has not been verified. Errors are possible. Check the original by document ID on CREST.

2 pages, machine transcribed from the CIA’s released scan.

Approved For Release 2000/08/08 : CIA-RDP96-00789R000100550011-9
y
23
5/NOFORN-SKEET CHANNELS ONLY
PROJECT SUN STREAK (U)
WARNING NOTICE:
INTELLIGENCE SOURCES AND METHODS INVOLVED
CRV Session Procedures Report (S/NF/SK)
IControl Number
: 8609
899
IDate of Session
: 20Feb87
IDate of Report
: 24Feb87
ISource Identifier: 003
1630
#36
113
1. (S/NF/SK)
Tasking: See original tasking data sheet, attached.
Intent of this session was to describe, in further detail, several
specific aspects of the target, perceived by source during previous
sessions.
2. (S/NF/SK)
Session:
Source was asked to refer to his earlier
sketches, then was cued in turn with specific areas of the site.
Session went extremely smoothly;
source product seems to have
benefitted significantly from the extensive amount of "time-on-target"
conducted over numerous sessions.
3. (S/NF/SK)
Summary: (Areas addressed separately) .
Point of impact - flat, hard, specially-prepared, mixed, metallic
object. When struck, it releases energy, particles and information.
Particle path - "projectile" is caused to course around (unimpeded,
possibly within a vacuum) a circular or oval "track" until the desired
speed/momentum/attitude is achieved, then a "switch" setting is altered
so as to permit the projectile to be propelled/impelled into the impact
point.
Chamber containing mass - what happens here is of brief duration, like a
"burst" or "flash". There is no rhythmic pulsing within the chamber.
Clamps holding mass - high-grade and high-strength materials, subject to
a high degree of "stress"; molecular degradation over time vs.
mechanical or physical stress.
Mass composition - alloy, "98%" one element; small amount of another
added to improve manageability and performance. Element is heavy and
dense, dark-colored like carbon, but not black (AI-"tastes yuky and
nasty"). The alloying material is a light silvery color (AOL-
"mercury"). The primary element making up the mass is refined from ore
taken out of an open pit mine. The ore body (loose dirt and earth) is
light-colored, beige, ocher with orange patches through it. The ore is
heat-processed, refined and impurities extracted mechanically.
Then
/NOFORN-SKEET CHANNELS ONLY
CLASSIFIED BY: DIA-DT
DECLASSIFY
OADR
Approved For Release 2000/08/08 : CIA-RDP96-00789R000100550011-9
Approved For Release 2000/08/08 : CIA-RDP96-00789R000100550011-9
/NOFORN-SKEET CHANNELS ONLY
more refined extraction takes the element out of the impurities instead
of vice versa.
As the material becomes more refined, its true dark-grey
color becomes more apparent.
4. (S/NF/SK) Feedback:
Source states that he has decided upon
modeling clay as medium for scale-model construction of this site; his
requirements are more clay and a large, shallow box.
SG1J
CPT, USA
CHORE5/NOFORN-SKEET CHANNELS ONLY
Approved For Release 2000/08/08 : CIA-RDP96-00789R000100550011-9

Follow along

New documents and dispatches as they publish. The newsletter is the one place to keep up.