Project Interloper

CIA STARGATE release

CIA-RDP96-00789R000100550009-2

Opens with: PROJECT SUN STREAK (U)

Warning: text for all documents has not been verified. Errors are possible. Check the original by document ID on CREST.

2 pages, machine transcribed from the CIA’s released scan.

Approved For Release 2000/08/08 : CIA-RDP96-00789R00010055000922
NOFORN-SKEET CHANNELS ONLY
PROJECT SUN STREAK (U)
WARNING NOTICE:
INTELLIGENCE SOURCES AND METHODS INVOLVED
.............
CRV Session Procedures Report (S/NF/SK)
IControl Number
=
8609
9
IDate of Session
: 18Feb87
IDate of Report
: 18Feb87
==
ISource Identifier: 003
099
0850
0945
1. (S/NF/SK)
Tasking:
See original tasking data sheet, attached.
Monitor intent was for source to provide greater detail/resolution with
regard to the "mass" described by #003 on 13Feb87.
2.
(S/NF/SK)
Session:
Started late.
Monitor engaged source in a
conversation about S6 modeling of this site (materials required,
approach, etc. ) .
Session focused on a S6 (sketching) of the mass,
referred to above.
Source was instructed to more fully describe the
mass, as well as its surroundings.
Source was quite "on line" and in an
unusually good work mood.
3. (S/NF/SK)
Summary:
(Sketch on p.4 represents the actual size/shape
of mass;
p.5 is a concept sketch only). The mass is dark grey and has
a texture like a "very fine-grained whetstone", i.e., feels smooth to
the touch but is of rougher texture at microscopic levels.
It is very
dense and heavy for its size and produces an AI of "physically
unsettling or threatening". The shape of the mass is important;
it
must be "faceted" at specific angles and have shaped/sized planes
to
function as desired.
The mass is fixed in space, within a chamber (like
an autoclave) , by high-tensile steel brackets. Physical protection is
required since, in the process of fragmenting ( "spaltung"), heat or
radiation is required or released which would be dangerous to humans.
This process begins by placing some sort of stress/energy/force on the
mass until a threshold is reached where a piece or small pieces split
off of the mass.
It cannot be predicted where upon (within) the mass
this splintering will occur; the equipment design is such that any
piece may go and still accomplish the desired effect.
This process
somehow "degrades" the mass to a point where it is no longer adequate
and must be replaced with a fresh mass in order to continue.
The used
mass may be regenerated/recycled/reprocessed by being reduced from its
precise shape, then reconstituted and reformed.
NOFORN-SKEET CHANNELS ONLY
CLASSIFIED BY: DIA-DT
DECLASSIFY
OADR
Approved For Release 2000/08/08 : CIA-RDP96-00789R000100550009-2
Approved For Release 2000/08/08 : CIA-RDP96-00789R000100550009-2
.
/NOFORN-SKEET CHANNELS ONLY
4. (S/NF/SK) Feedback:
Source was informed that he would still be
requested to S6 a site model;
he was dispatched to identify a suitable
material .
SG1J
CPT, USA
/NOFORN-SKEET CHANNELS ONLY
Approved For Release 2000/08/08 : CIA-RDP96-00789R000100550009-2

Follow along

New documents and dispatches as they publish. The newsletter is the one place to keep up.